Answers to: Reasons for not using F@H.
Moderators: Site Moderators, FAHC Science Team
-
- Posts: 90
- Joined: Wed Mar 04, 2009 4:30 am
- Hardware configuration: L1:Dual Core 1.6ghz, 1GB Ram
L2:
PC1&2:P2 3.2ghz, 1GB Ram, Gforce 6800 :(
PS3 - Location: Australia
Re: Answers to: Reasons for not using F@H.
Had a quick check through one of the 2 computers she has folding, 1.3mb is the average bandwidth usage per day for a points per day figure of ~240 [this is on the slower computer which has the cpu usage set at 50%]. This was over a 14 day period so the figures should be fairly accurate, although she did seem to be getting a lot of smaller [<1mb] work units [likely due to the 256mb ram flag?].
I got these figures from trolling the logs for bytes information both sent and received.. I am assuming that (### expected) refers to bytes expected in download.
Will check the other computer tonight [the workhorse of the 2] but so far it looks like the news is good for bandwidth usage
I got these figures from trolling the logs for bytes information both sent and received.. I am assuming that (### expected) refers to bytes expected in download.
Will check the other computer tonight [the workhorse of the 2] but so far it looks like the news is good for bandwidth usage
Re: Answers to: Reasons for not using F@H.
If Algore can run a house that uses 5 times what mine does, and get away with it because "he's working to better the environment", then I have little guilt for dedicating one computer to run fah 24/7 in order to beat a disease. I own seven PCs (4 desktops and 3 laptops) in various parts of my house, typically only two are on at a time, whichever one I am working (or playing) on and the one running fah, which is on all the time. As a Cancer survivor, it is a small price to pay to dedicate a PC to maybe getting to a cure for a disease.
Re: Answers to: Reasons for not using F@H.
Interesting.
Here you're discussing about the electricity and efficiency of our contribution.
In other forum some guys are trying to convince the others that F@H is a farse or that it's "sold" to the Pharmaceutic industry..
I need to translate more parts of this toppic.
By the way, thank you so much for this toppic.
Here you're discussing about the electricity and efficiency of our contribution.
In other forum some guys are trying to convince the others that F@H is a farse or that it's "sold" to the Pharmaceutic industry..
I need to translate more parts of this toppic.
By the way, thank you so much for this toppic.
Lab QF FCFRP-USP team (143202)
Clube do Hardware team (148894)
Clube do Hardware team (148894)
-
- Posts: 10179
- Joined: Thu Nov 29, 2007 4:30 pm
- Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
- Location: Arizona
- Contact:
Re: Answers to: Reasons for not using F@H.
That would be impossible to prove. All of the results are published openly, and the documents are available to read on the project web site.In other forum some guys are trying to convince the others that F@H is a farce or that it's "sold" to the Pharmaceutic industry.
But a wise man cannot reason away what a fool believes.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Re: Answers to: Reasons for not using F@H.
There is no doubt that some companies in the pharmaceutical industry will make use of the results that FAH produces. The research is published in the public domain and those papers are freely available to anyone (perhaps for the publishing cost, depending on the policies of the scientific journal in which it is published).
The concept of "sold" implies that a particular company pays Stanford University for the research in order to keep it proprietary. Since FAH is funded partly by Stanford and mostly by public grants, the proprietary rights are not granted to a specific company but are open to anyone that can use the information. Those companies may be able to develop proprietary information from the information in the papers, but that research would be performed by each drug company independently (and in completion with each other) based on the fundamental scientific information that FAH has already discovered and published. Show your friends the list of papers: http://folding.stanford.edu/English/Papers
Your friends may be correct about other Distributed Computing projects, but not FAH.
The concept of "sold" implies that a particular company pays Stanford University for the research in order to keep it proprietary. Since FAH is funded partly by Stanford and mostly by public grants, the proprietary rights are not granted to a specific company but are open to anyone that can use the information. Those companies may be able to develop proprietary information from the information in the papers, but that research would be performed by each drug company independently (and in completion with each other) based on the fundamental scientific information that FAH has already discovered and published. Show your friends the list of papers: http://folding.stanford.edu/English/Papers
Your friends may be correct about other Distributed Computing projects, but not FAH.
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.
-
- Posts: 40
- Joined: Sun Aug 16, 2009 8:30 am
- Hardware configuration: System Specs: GIGABYTE 990FXA-UD3; AMD Phenom II x6 1090T; 8GB Corsair Dominator CMD8GX3M4A1333C7; XFX HD-6950-CNFC 2G
Re: Answers to: Reasons for not using F@H.
Recently I uninstalled BOINC and installed Folding@Home, several reasons. I had a folding@home client folding on my wife's computer for the last few years, not a big issue. Enough background. Lets see, my system is a dual core proc with a CUDA capable video card. The client installed is the latest, but does it run on both cores or the GPU? NOPE. Why? Because that requires MORE clients! I have a choice between two different clients for my CPU and two clients for my video card. I wasted hours over the last few days trying to find out which of the two CPU clients I should be using, I still have not found the answer. I have not found a single set of instuctions that tell me how to get the client I have to run on the GPU or even detect it!
Reason for not folding, how about user abuse? Teams are begging for people to fold, they get people started discover others are getting a lot more points, and try to find instructions on how to setup your "client" on thier system. So what idiot (please don't take offense, it is a simple statement of fact as I see it) designed your system? Why can't the installer detect your processor type, identify how many cores are in it, detect your video card and install a single correct client?
So the answer to the question of "reason for not using F@H" is simply bad implamentation or as I prefer to say "User Abuse."
I support the goals of F@H, but this is stupid. Is multi-threading beyound your programers?
Yes I am frustrated. The latest and greates client is faster than version 5 that my wife has been using for some time, but come on. This is silly.
Is there a single place I can go to install a single client that will use both cores and the GPU or even get instructions on how to setup the your current client, that answer is NO. There is no single client and no single set of instructions. You are using the same basic tech that Seti@Home was using in 1995!
You want more folders, design a user friendly interface with a single instance that basicly hides the inner workings. I and many others (I know several people that quit folding for these reasons) don't want to spend several days reading worthless FAQs that side step most of the questions they proport to answer and point off to a utterly worthless wiki. One of the reasons BOINC is so popular is that it is very easy to use and get good performance out of it.
Reason for not folding, how about user abuse? Teams are begging for people to fold, they get people started discover others are getting a lot more points, and try to find instructions on how to setup your "client" on thier system. So what idiot (please don't take offense, it is a simple statement of fact as I see it) designed your system? Why can't the installer detect your processor type, identify how many cores are in it, detect your video card and install a single correct client?
So the answer to the question of "reason for not using F@H" is simply bad implamentation or as I prefer to say "User Abuse."
I support the goals of F@H, but this is stupid. Is multi-threading beyound your programers?
Yes I am frustrated. The latest and greates client is faster than version 5 that my wife has been using for some time, but come on. This is silly.
Is there a single place I can go to install a single client that will use both cores and the GPU or even get instructions on how to setup the your current client, that answer is NO. There is no single client and no single set of instructions. You are using the same basic tech that Seti@Home was using in 1995!
You want more folders, design a user friendly interface with a single instance that basicly hides the inner workings. I and many others (I know several people that quit folding for these reasons) don't want to spend several days reading worthless FAQs that side step most of the questions they proport to answer and point off to a utterly worthless wiki. One of the reasons BOINC is so popular is that it is very easy to use and get good performance out of it.
System Specs: GIGABYTE 990FXA-UD3; AMD Phenom II x6 1090T; 8GB Corsair Dominator CMD8GX3M4A1333C7; XFX HD-6950-CNFC 2G
-
- Site Moderator
- Posts: 6349
- Joined: Sun Dec 02, 2007 10:38 am
- Location: Bordeaux, France
- Contact:
Re: Answers to: Reasons for not using F@H.
SMP and GPU clients are still betas and can be found on the High Performance Client page : http://folding.stanford.edu/English/DownloadWinOther
The official guides to install them are available here : http://folding.stanford.edu/English/Guide
BOINC is easy to use, but not truly optimized ... FAH has a different approach : there is an easy to use client, but that won't use the full potential of your machine (uniprocessor client), and some highly optimized clients (SMP and GPU) that require more babysitting to work, but that are much more powerful.
The official guides to install them are available here : http://folding.stanford.edu/English/Guide
BOINC is easy to use, but not truly optimized ... FAH has a different approach : there is an easy to use client, but that won't use the full potential of your machine (uniprocessor client), and some highly optimized clients (SMP and GPU) that require more babysitting to work, but that are much more powerful.
-
- Posts: 1024
- Joined: Sun Dec 02, 2007 12:43 pm
Re: Answers to: Reasons for not using F@H.
I second that.
BOINC is easy to use, and so is the FAH classic client. You won't find any "user abuse" if you use either of them, but you also will not use your equipment to the max. In time, the FAH SMP and GPU clients will mature and be easier to use. In time, clients like them will be added to BOINC.
There are some excellent reasons why some people should run BOINC and some excellent reasons why other people should run FAH. We encourage you to take all the facts into consideration and make a decision that works for you.
Thank you for your forthright comments on FAH. I'm sure Stanford will take them into consideration as they develop future versions of FAH.
BOINC is easy to use, and so is the FAH classic client. You won't find any "user abuse" if you use either of them, but you also will not use your equipment to the max. In time, the FAH SMP and GPU clients will mature and be easier to use. In time, clients like them will be added to BOINC.
There are some excellent reasons why some people should run BOINC and some excellent reasons why other people should run FAH. We encourage you to take all the facts into consideration and make a decision that works for you.
Thank you for your forthright comments on FAH. I'm sure Stanford will take them into consideration as they develop future versions of FAH.
-
- Posts: 96
- Joined: Wed Dec 05, 2007 7:15 am
- Hardware configuration: PS3, Phenom II X4, QX9775, HD 8570
- Contact:
Re: Answers to: Reasons for not using F@H.
If I were to make any effort to recruit my college, I would need a solution to a tiny but important problem. Basically these computers are on 24/7 usually doing nothing (even though that is wasteful of energy) but we want F@H to run in the background only when nobody is logged into the machines. We don't want people in the AutoCAD or Photoshop classes to be complaining that their rendering times are suffering.
On another note, I wonder if you told someone their machine is running F@H would they falsely perceive the computer to be running slower than if they weren't informed? Idea for Blind experiment maybe?
On another note, I wonder if you told someone their machine is running F@H would they falsely perceive the computer to be running slower than if they weren't informed? Idea for Blind experiment maybe?
Carnivorous Labs
http://garden-experiment.blogspot.com/
http://garden-experiment.blogspot.com/
-
- Posts: 10179
- Joined: Thu Nov 29, 2007 4:30 pm
- Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
- Location: Arizona
- Contact:
Re: Answers to: Reasons for not using F@H.
Run fah as a scheduled task. Only start the task when the computer as been idle for 20 minutes, and stop the client as soon as it becomes active (mouse move or keyboard click). Run the task under an Admin account not used by anyone else, that way it can run other than on a student account.
If configured to only run when idle, there is no way it could interfere with PC performance.
If configured to only run when idle, there is no way it could interfere with PC performance.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
-
- Posts: 96
- Joined: Wed Dec 05, 2007 7:15 am
- Hardware configuration: PS3, Phenom II X4, QX9775, HD 8570
- Contact:
Re: Answers to: Reasons for not using F@H.
it would be a lot easier to combine all the smp/up/gpu clients because some machines are dual core, others aren't. future purchases maybe more cores and compatible GPU. hopefully the win smp client will do away with those awful things MPICH and Deino MPI too.
Carnivorous Labs
http://garden-experiment.blogspot.com/
http://garden-experiment.blogspot.com/
-
- Posts: 10179
- Joined: Thu Nov 29, 2007 4:30 pm
- Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
- Location: Arizona
- Contact:
Re: Answers to: Reasons for not using F@H.
I appreciate that you want to maximize the donations, but even one core per machine is a big help. I've even used that as a selling point. Hey look, fah only uses 1 core out of 4, so you can leave it running 24/7 and never see a performance hit (in a regular office environment). I'd never do that where they use AutoCAD, but you get the idea.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
-
- Posts: 96
- Joined: Wed Dec 05, 2007 7:15 am
- Hardware configuration: PS3, Phenom II X4, QX9775, HD 8570
- Contact:
Re: Answers to: Reasons for not using F@H.
I'd like to see if I can appeal to some devout Christians and appeal to their sense of moral duty so they can evangelize f@h to fellow church attendees. As long as they aren't the type of Christians who despise medical science for what they perceive as playing God. Or the other type of christian, the kind that hate science all together for suggesting things like evolution. Some people want to tell the entire world about jesus. I want to tell the entire world about f@h. We got something in common there.
Carnivorous Labs
http://garden-experiment.blogspot.com/
http://garden-experiment.blogspot.com/
Re: Answers to: Reasons for not using F@H.
Um OK, so you are looking for some very specific answers to 'reasons not to fold' addressing religious people, there are some teams with names that suggest they are along the lines of the type you are looking for, Nerds for Jesus (I'm assuming this isn't irony) for example maybe you could get some of those specific answers from them.theteofscuba wrote:I'd like to see if I can appeal to some devout Christians and appeal to their sense of moral duty so they can evangelize f@h to fellow church attendees. As long as they aren't the type of Christians who despise medical science for what they perceive as playing God. Or the other type of christian, the kind that hate science all together for suggesting things like evolution. Some people want to tell the entire world about jesus. I want to tell the entire world about f@h. We got something in common there.
kiore.
i7 7800x RTX 3070 OS= win10. AMD 3700x RTX 2080ti OS= win10 .
Team page: https://www.rationalskepticism.org/viewtopic.php?t=616
-
- Posts: 1
- Joined: Mon Nov 23, 2009 4:20 pm
Re: Answers to: Reasons for not using F@H.
well i have been a member of a folding team for about 6 months now. and the biggest reason i can see for not folding is the total lack of support when someone has issues getting things correctly setup. So i am the point of frustration that I am actually thinking about giving it up. I would think more people here would be slightly more serious about what we are doing. well I hope things get better around here or i am sure I wont be the only one ready to give up.