171.64.65.56 not responding

Moderators: Site Moderators, FAHC Science Team

Post Reply
kasson
Pande Group Member
Posts: 1459
Joined: Thu Nov 29, 2007 9:37 pm

Re: 171.64.65.56 is in Reject status

Post by kasson »

We noted the server down and took corrective action earlier this morning. (No forum access at the time, so no post.)
Aardvark
Posts: 143
Joined: Sat Jul 12, 2008 4:22 pm
Location: Team MacResource

Re: 171.64.65.56 is in Reject status

Post by Aardvark »

And a "Thank You" is sent to all that did "extra duty" to get this problem resolved.
What is past is prologue!
noorman
Posts: 270
Joined: Sun Dec 02, 2007 2:26 pm
Hardware configuration: Folders: Intel C2D E6550 @ 3.150 GHz + GPU XFX 9800GTX+ @ 765 MHZ w. WinXP-GPU
AMD A2X64 3800+ @ stock + GPU XFX 9800GTX+ @ 775 MHZ w. WinXP-GPU
Main rig: an old Athlon Barton 2500+ @2.25 GHz & 2* 512 MB RAM Apacer, Radeon 9800Pro, WinXP SP3+
Location: Belgium, near the International Sea-Port of Antwerp

Re: 171.64.65.56 is in Reject status

Post by noorman »

Aardvark wrote:And a "Thank You" is sent to all that did "extra duty" to get this problem resolved.
.


Indeed, a 'Thank You' to all on Sunday duty :D

Especially Dr. Kasson Image

It was Prof. Pande who gave me the green light on the server being up again (after my report in the new thread on this server) ...


.
- stopped Linux SMP w. HT on i7-860@3.5 GHz
....................................
Folded since 10-06-04 till 09-2010
jcfuller
Posts: 10
Joined: Thu Oct 30, 2008 11:22 am
Location: Fort Edward, NY

Re: 171.64.65.56 is in Reject status

Post by jcfuller »

Problems getting work:

Code: Select all

[11:26:21] + Attempting to get work packet
[11:26:21] - Connecting to assignment server
[11:26:21] Connecting to http://assign.stanford.edu:8080/
[11:26:21] Posted data.
[11:26:21] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[11:26:21] + News From Folding@Home: Welcome to Folding@Home
[11:26:21] Loaded queue successfully.
[11:26:21] Connecting to http://171.64.65.56:8080/
[11:26:21] - Couldn't send HTTP request to server
[11:26:21]   (Got status 503)
[11:26:21] + Could not connect to Work Server
[11:26:21] - Attempt #8  to get work failed, and no other work to do.
             Waiting before retry.

James
jcfuller
Posts: 10
Joined: Thu Oct 30, 2008 11:22 am
Location: Fort Edward, NY

Re: 171.64.65.56 is in Reject status

Post by jcfuller »

All's well now. Not sure if it was Client or not?
Shut it down with Ctrl-C. waited a bit and fired it back up and it connected???

James
rrob
Posts: 3
Joined: Sun Jun 29, 2008 7:44 pm
Location: Kansas

Re: 171.64.65.56 is in Reject status

Post by rrob »

Shut it down with Ctrl-C. waited a bit and fired it back up and it connected???
Didn't work for me.

Code: Select all

Executable: ./fah6
Arguments: -smp -verbosity 9 

[11:52:08] - Ask before connecting: No
[11:52:08] - User name: rrob (Team 12772)
[11:52:08] - User ID: 5D7CB95502C1A25B
[11:52:08] - Machine ID: 1
[11:52:08] 
[11:52:08] Loaded queue successfully.
[11:52:08] - Autosending finished units...
[11:52:08] Trying to send all finished work units
[11:52:08] + No unsent completed units remaining.
[11:52:08] - Autosend completed
[11:52:08] - Preparing to get new work unit...
[11:52:08] + Attempting to get work packet
[11:52:08] - Will indicate memory of 598 MB
[11:52:08] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 7, Stepping: 8
[11:52:08] - Connecting to assignment server
[11:52:08] Connecting to http://assign.stanford.edu:8080/
[11:52:08] Posted data.
[11:52:08] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[11:52:08] + News From Folding@Home: Welcome to Folding@Home
[11:52:09] Loaded queue successfully.
[11:52:09] Connecting to http://171.64.65.56:8080/
[11:52:09] - Couldn't send HTTP request to server
[11:52:09]   (Got status 503)
[11:52:09] + Could not connect to Work Server
[11:52:09] - Attempt #1  to get work failed, and no other work to do.
             Waiting before retry.
[11:52:23] + Attempting to get work packet
[11:52:23] - Will indicate memory of 598 MB
[11:52:23] - Connecting to assignment server
[11:52:23] Connecting to http://assign.stanford.edu:8080/
[11:52:24] Posted data.
[11:52:24] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[11:52:24] + News From Folding@Home: Welcome to Folding@Home
[11:52:24] Loaded queue successfully.
[11:52:24] Connecting to http://171.64.65.56:8080/
[11:52:24] - Couldn't send HTTP request to server
[11:52:24]   (Got status 503)
[11:52:24] + Could not connect to Work Server
[11:52:24] - Attempt #2  to get work failed, and no other work to do.
             Waiting before retry.
[11:52:48] + Attempting to get work packet
[11:52:48] - Will indicate memory of 598 MB
[11:52:48] - Connecting to assignment server
[11:52:48] Connecting to http://assign.stanford.edu:8080/
[11:52:49] Posted data.
[11:52:49] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[11:52:49] + News From Folding@Home: Welcome to Folding@Home
[11:52:49] Loaded queue successfully.
[11:52:49] Connecting to http://171.64.65.56:8080/
[11:52:49] - Couldn't send HTTP request to server
[11:52:49]   (Got status 503)
[11:52:49] + Could not connect to Work Server
[11:52:49] - Attempt #3  to get work failed, and no other work to do.
             Waiting before retry.
[11:53:10] + Attempting to get work packet
[11:53:10] - Will indicate memory of 598 MB
[11:53:10] - Connecting to assignment server
[11:53:10] Connecting to http://assign.stanford.edu:8080/
[11:53:11] Posted data.
[11:53:11] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[11:53:11] + News From Folding@Home: Welcome to Folding@Home
[11:53:11] Loaded queue successfully.
[11:53:11] Connecting to http://171.64.65.56:8080/
[11:53:11] - Couldn't send HTTP request to server
[11:53:11]   (Got status 503)
[11:53:11] + Could not connect to Work Server
[11:53:11] - Attempt #4  to get work failed, and no other work to do.
             Waiting before retry.
[11:54:00] + Attempting to get work packet
[11:54:00] - Will indicate memory of 598 MB
[11:54:00] - Connecting to assignment server
[11:54:00] Connecting to http://assign.stanford.edu:8080/
[11:54:00] Posted data.
[11:54:00] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[11:54:00] + News From Folding@Home: Welcome to Folding@Home
[11:54:00] Loaded queue successfully.
[11:54:00] Connecting to http://171.64.65.56:8080/
[11:54:00] - Couldn't send HTTP request to server
[11:54:00]   (Got status 503)
[11:54:00] + Could not connect to Work Server
[11:54:00] - Attempt #5  to get work failed, and no other work to do.
             Waiting before retry.
BrokenWolf
Posts: 126
Joined: Sat Aug 02, 2008 3:08 am

Re: 171.64.65.56 is in Reject status

Post by BrokenWolf »

No joy for my clients as well. I know that a team mate has the same issue as he asked me to check on his clients and they are getting the same (Got Status 503) as mine are getting.

Code: Select all

Arguments: -smp -advmethods -verbosity 9

[14:49:17] - Ask before connecting: No
[14:49:17] - User name: BrokenWolf (Team 1971)
[14:49:17] - User ID: 42B1EF28557A24F2
[14:49:17] - Machine ID: 1
[14:49:17]
[14:49:17] Loaded queue successfully.
[14:49:17] - Preparing to get new work unit...
[14:49:17] + Attempting to get work packet
[14:49:17] - Will indicate memory of 1000 MB
[14:49:17] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 15, Stepping: 8[14:49:17] - Connecting to assignment server
[14:49:17] Connecting to http://assign.stanford.edu:8080/
[14:49:17] - Autosending finished units...
[14:49:17] Trying to send all finished work units


[14:49:17] + Attempting to send results
[14:49:17] - Reading file work/wuresults_07.dat from core
[14:49:17]   (Read 25985361 bytes from disk)
[14:49:17] Connecting to http://171.64.65.56:8080/
[14:49:17] Posted data.
[14:49:17] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[14:49:17] + News From Folding@Home: Welcome to Folding@Home
[14:49:17] - Couldn't send HTTP request to server
[14:49:17] + Could not connect to Work Server (results)
[14:49:17]     (171.64.65.56:8080)
[14:49:17] - Error: Could not transmit unit 07 (completed November 17) to work server.
[14:49:17] - 7 failed uploads of this unit.


BrokenWolf
Image
VijayPande
Pande Group Member
Posts: 2058
Joined: Fri Nov 30, 2007 6:25 am
Location: Stanford

Re: 171.64.65.56 is in Reject status

Post by VijayPande »

Looks ok from our side. let us know if you continue to have problems.
Prof. Vijay Pande, PhD
Departments of Chemistry, Structural Biology, and Computer Science
Chair, Biophysics
Director, Folding@home Distributed Computing Project
Stanford University
ikerekes
Posts: 94
Joined: Thu Nov 13, 2008 4:18 pm
Hardware configuration: q6600 @ 3.3Ghz windows xp-sp3 one SMP2 (2.15 core) + 1 9800GT native GPU2
Athlon x2 6000+ @ 3.0Ghz ubuntu 8.04 smp + asus 9600GSO gpu2 in wine wrapper
5600X2 @ 3.19Ghz ubuntu 8.04 smp + asus 9600GSO gpu2 in wine wrapper
E5200 @ 3.7Ghz ubuntu 8.04 smp2 + asus 9600GT silent gpu2 in wine wrapper
E5200 @ 3.65Ghz ubuntu 8.04 smp2 + asus 9600GSO gpu2 in wine wrapper
E6550 vmware ubuntu 8.4.1
q8400 @ 3.3Ghz windows xp-sp3 one SMP2 (2.15 core) + 1 9800GT native GPU2
Athlon II 620 @ 2.6 Ghz windows xp-sp3 one SMP2 (2.15 core) + 1 9800GT native GPU2
Location: Calgary, Canada

Re: 171.64.65.56 is in Reject status

Post by ikerekes »

16:08:25] - Successful: assigned to (171.64.65.56).
[16:08:25] + News From Folding@Home: Welcome to Folding@Home
[16:08:26] Loaded queue successfully.
[16:08:26] - Couldn't send HTTP request to server
[16:08:26] (Got status 503)
[16:08:26] + Could not connect to Work Server
[16:08:26] - Attempt #9 to get work failed, and no other work to do.
Waiting before retry.
Image
Ren02
Posts: 98
Joined: Tue Dec 11, 2007 1:16 am
Location: Estonia

Re: 171.64.65.56 is in Reject status

Post by Ren02 »

No go:

Code: Select all

[13:58:41] Folding@home Core Shutdown: FINISHED_UNIT
[14:01:58] CoreStatus = 64 (100)
[14:01:58] Unit 8 finished with 73 percent of time to deadline remaining.
[14:01:58] Updated performance fraction: 0.735706
[14:01:58] Sending work to server


[14:01:58] + Attempting to send results
[14:01:58] - Reading file work/wuresults_08.dat from core
[14:01:58]   (Read 26080867 bytes from disk)
[14:01:58] Connecting to http://171.64.65.56:8080/
[16:24:23] - Autosending finished units...
[16:24:23] Trying to send all finished work units
[16:24:23] - Already sending work
[16:24:23] + Sent 0 of 1 completed units to the server
[16:24:23] - Autosend completed
[18:31:12] ***** Got a SIGTERM signal (15)
[18:31:12] Killing all core threads

Folding@Home Client Shutdown.


--- Opening Log file [November 17 18:32:12] 


# SMP Client ##################################################################
###############################################################################

                       Folding@Home Client Version 6.02

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/r3d/foldingathome/CPU1
Executable: /home/r3d/foldingathome/CPU1/fah6
Arguments: -local -smp -verbosity 9 -advmethods 

[18:32:12] - Ask before connecting: No
[18:32:12] - User name: Ren02 (Team 385)
[18:32:12] - User ID: 428A3A8C6689381E
[18:32:12] - Machine ID: 1
[18:32:12] 
[18:32:13] Loaded queue successfully.
[18:32:13] - Preparing to get new work unit...
[18:32:13] + Attempting to get work packet
[18:32:13] - Will indicate memory of 1000 MB
[18:32:13] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 15, Stepping: 8
[18:32:13] - Connecting to assignment server
[18:32:13] Connecting to http://assign.stanford.edu:8080/
[18:32:13] - Autosending finished units...
[18:32:13] Trying to send all finished work units


[18:32:13] + Attempting to send results
[18:32:13] - Reading file work/wuresults_08.dat from core
[18:32:13]   (Read 26080867 bytes from disk)
[18:32:13] Connecting to http://171.64.65.56:8080/
[18:32:14] Posted data.
[18:32:14] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[18:32:14] + News From Folding@Home: Welcome to Folding@Home
[18:32:14] Loaded queue successfully.
[18:32:14] Connecting to http://171.64.65.56:8080/
[18:32:15] - Couldn't send HTTP request to server
[18:32:15]   (Got status 503)
[18:32:15] + Could not connect to Work Server
[18:32:15] - Attempt #1  to get work failed, and no other work to do.
             Waiting before retry.
[18:32:30] + Attempting to get work packet
[18:32:30] - Will indicate memory of 1000 MB
[18:32:30] - Connecting to assignment server
[18:32:30] Connecting to http://assign.stanford.edu:8080/
[18:32:30] Posted data.
[18:32:30] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[18:32:30] + News From Folding@Home: Welcome to Folding@Home
[18:32:30] Loaded queue successfully.
[18:32:30] Connecting to http://171.64.65.56:8080/
[18:32:31] - Couldn't send HTTP request to server
[18:32:31]   (Got status 503)
[18:32:31] + Could not connect to Work Server
[18:32:31] - Attempt #2  to get work failed, and no other work to do.
             Waiting before retry.
[18:32:52] + Attempting to get work packet
[18:32:52] - Will indicate memory of 1000 MB
[18:32:52] - Connecting to assignment server
[18:32:52] Connecting to http://assign.stanford.edu:8080/
[18:32:53] Posted data.
[18:32:53] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[18:32:53] + News From Folding@Home: Welcome to Folding@Home
[18:32:53] Loaded queue successfully.
[18:32:53] Connecting to http://171.64.65.56:8080/
[18:32:53] - Couldn't send HTTP request to server
[18:32:53]   (Got status 503)
[18:32:53] + Could not connect to Work Server
[18:32:53] - Attempt #3  to get work failed, and no other work to do.
             Waiting before retry.
[18:33:14] + Attempting to get work packet
[18:33:14] - Will indicate memory of 1000 MB
[18:33:14] - Connecting to assignment server
[18:33:14] Connecting to http://assign.stanford.edu:8080/
[18:33:15] Posted data.
[18:33:15] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[18:33:15] + News From Folding@Home: Welcome to Folding@Home
[18:33:15] Loaded queue successfully.
[18:33:15] Connecting to http://171.64.65.56:8080/
[18:33:15] - Couldn't send HTTP request to server
[18:33:15]   (Got status 503)
[18:33:15] + Could not connect to Work Server
[18:33:15] - Attempt #4  to get work failed, and no other work to do.
             Waiting before retry.
[18:34:08] + Attempting to get work packet
[18:34:08] - Will indicate memory of 1000 MB
[18:34:08] - Connecting to assignment server
[18:34:08] Connecting to http://assign.stanford.edu:8080/
[18:34:09] Posted data.
[18:34:09] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[18:34:09] + News From Folding@Home: Welcome to Folding@Home
[18:34:09] Loaded queue successfully.
[18:34:09] Connecting to http://171.64.65.56:8080/
[18:34:09] - Couldn't send HTTP request to server
[18:34:09]   (Got status 503)
[18:34:09] + Could not connect to Work Server
[18:34:09] - Attempt #5  to get work failed, and no other work to do.
             Waiting before retry.
[18:35:44] + Attempting to get work packet
[18:35:44] - Will indicate memory of 1000 MB
[18:35:44] - Connecting to assignment server
[18:35:44] Connecting to http://assign.stanford.edu:8080/
[18:35:45] Posted data.
[18:35:45] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[18:35:45] + News From Folding@Home: Welcome to Folding@Home
[18:35:45] Loaded queue successfully.
[18:35:45] Connecting to http://171.64.65.56:8080/
[18:35:45] - Couldn't send HTTP request to server
[18:35:45]   (Got status 503)
[18:35:45] + Could not connect to Work Server
[18:35:45] - Attempt #6  to get work failed, and no other work to do.
             Waiting before retry. 
Edit: Well, what do you know. I did another restart to the client and this time after 2 unsuccessful attempts it managed to grab a new WU. The results are not uploading though and typing: http://171.64.65.56:8080/ in the browser returns a completely blank page.
Image
MoneyGuyBK
Posts: 179
Joined: Sun Dec 02, 2007 6:40 am
Location: Team_XPS ..... OC, S. Calif

Re: 171.64.65.56 is in Reject status

Post by MoneyGuyBK »

It's not working for me ....
my Linux client works, no uploads!!!

This has been going on since Sunday...
For the last couple of days and as many WUs, I see my Linux client finishing to 100% and saying it is attempting to upload results; but then it does not and sits still.

I have tried the -send all command to no avail...
MY log is attached... if any guru could guide me please... TIA

Code: Select all

[10:03:31] Completed 245000 out of 250000 steps  (98%)
[10:13:15] Completed 247500 out of 250000 steps  (99%)
[10:23:00] Completed 250000 out of 250000 steps  (100%)
[10:24:01] 
[10:24:01] Finished Work Unit:
[10:24:01] - Reading up to 21141072 from "work/wudata_02.trr": Read 21141072
[10:24:02] trr file hash check passed.
[10:24:02] - Reading up to 4508500 from "work/wudata_02.xtc": Read 4508500
[10:24:02] xtc file hash check passed.
[10:24:02] edr file hash check passed.
[10:24:02] logfile size: 177953
[10:24:02] Leaving Run
[10:24:06] - Writing 26033189 bytes of core data to disk...
[10:24:07]   ... Done.
[10:24:14] - Shutting down core
[10:24:14] 
[10:24:14] Folding@home Core Shutdown: FINISHED_UNIT
[10:27:27] CoreStatus = 64 (100)
[10:27:27] Unit 2 finished with 77 percent of time to deadline remaining.
[10:27:27] Updated performance fraction: 0.761681
[10:27:27] Sending work to server


[10:27:27] + Attempting to send results
[10:27:27] - Reading file work/wuresults_02.dat from core
[10:27:27]   (Read 26033189 bytes from disk)
[10:27:27] Connecting to http://171.64.65.56:8080/
[14:42:20] - Autosending finished units...
[14:42:20] Trying to send all finished work units
[14:42:20] - Already sending work
[14:42:20] + Sent 0 of 1 completed units to the server
[14:42:20] - Autosend completed
[17:29:23] ***** Got an Activate signal (2)
[17:29:23] Killing all core threads

Folding@Home Client Shutdown.


--- Opening Log file [November 17 17:29:28] 


# Linux Console Edition #######################################################
###############################################################################

                       Folding@Home Client Version 6.02

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/ubuntu1/folding/FAH
Executable: ./fah6
Arguments: -send all 

[17:29:28] - Ask before connecting: No
[17:29:28] - User name: MoneyGuyBK (Team 80856)
[17:29:28] - User ID: EB***0266
[17:29:28] - Machine ID: 3
[17:29:28] 
[17:29:29] Loaded queue successfully.
[17:29:29] Attempting to return result(s) to server...
[17:29:29] - Read packet limit of 540015616... Set to 524286976.


[17:29:29] + Attempting to send results

Folding@Home Client Shutdown.


--- Opening Log file [November 17 17:47:27] 


# Linux Console Edition #######################################################
###############################################################################

                       Folding@Home Client Version 6.02

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/ubuntu1/folding/FAH
Executable: ./fah6
Arguments: -send all 

[17:47:27] - Ask before connecting: No
[17:47:27] - User name: MoneyGuyBK (Team 80856)
[17:47:27] - User ID: EB***0266
[17:47:27] - Machine ID: 3
[17:47:27] 
[17:47:27] Loaded queue successfully.
[17:47:27] Attempting to return result(s) to server...
[17:47:27] - Read packet limit of 540015616... Set to 524286976.


[17:47:27] + Attempting to send results






Peace
T.E.A.M. “Together Everyone Accomplishes Miracles!”
Image
OC, S. California ... God Bless All
rrob
Posts: 3
Joined: Sun Jun 29, 2008 7:44 pm
Location: Kansas

Re: 171.64.65.56 is in Reject status

Post by rrob »

finally downloaded a wu after 7hrs of attempts. i stopped and restarted twice.

Code: Select all

[17:30:47] - Attempt #16  to get work failed, and no other work to do.
             Waiting before retry.
[18:03:29] - Autosending finished units...
[18:03:29] Trying to send all finished work units
[18:03:29] + No unsent completed units remaining.
[18:03:29] - Autosend completed
[18:18:58] + Attempting to get work packet
[18:18:58] - Will indicate memory of 598 MB
[18:18:58] - Connecting to assignment server
[18:18:58] Connecting to http://assign.stanford.edu:8080/
[18:18:59] Posted data.
[18:18:59] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[18:18:59] + News From Folding@Home: Welcome to Folding@Home
[18:18:59] Loaded queue successfully.
[18:18:59] Connecting to http://171.64.65.56:8080/
[18:19:05] Posted data.
[18:19:05] Initial: 0000; - Receiving payload (expected size: 4832300)
[18:19:09] - Downloaded at ~1179 kB/s
[18:19:09] - Averaged speed for that direction ~1323 kB/s
[18:19:09] + Received work.
[18:19:09] + Closed connections
[18:19:09] 
[18:19:09] + Processing work unit
MoneyGuyBK
Posts: 179
Joined: Sun Dec 02, 2007 6:40 am
Location: Team_XPS ..... OC, S. Calif

Re: 171.64.65.56 is in Reject status

Post by MoneyGuyBK »

My problem is still with uploading results.... I have at least two WU's I know of that have not uploaded since Sunday morning.
I am afraid if this goes on, I may be passing the deadline :(

I am however easily downloading and crunching new work, and adding to my stockpile here.







Peace
T.E.A.M. “Together Everyone Accomplishes Miracles!”
Image
OC, S. California ... God Bless All
ppetrone
Pande Group Member
Posts: 115
Joined: Wed Dec 12, 2007 6:20 pm
Location: Stanford
Contact:

Re: 171.64.65.56 is in Reject status

Post by ppetrone »

you definitely should not miss the deadline. let me see if we can get it to work now.
ppetrone
Pande Group Member
Posts: 115
Joined: Wed Dec 12, 2007 6:20 pm
Location: Stanford
Contact:

Re: 171.64.65.56 is in Reject status

Post by ppetrone »

The server is up and accepting but it seems it is overloaded. Let me fwd this to Peter, who is in charge of that server. (Sorry for the hassle)
Pau
Post Reply