Folding on Cloud instructions (3 mil ppd)
Moderators: Site Moderators, FAHC Science Team
Re: Folding on Cloud instructions (3 mil ppd)
This is awesome, thanks Knish for taking the time to write out such detailed instructions for us cloud neophytes. I found the GCP instructions to be slightly out-of-date, for example I had to execute Step 3 by not just clicking on Compute Engine, but proceeding one step further in (Create an instance?) before it initialized instancing on my account. Before that, I was not able to access "GPUs (all regions)" in Quotas. I think one other GUI thing had shifted, but it was easy to figure out. Azure was a breeze.
~200m points of folding compute at no required cost is great. Hopefully more people see this thread -- took me all of an hour to get both set up, and that was with the hitch on GCP quota set up.
~200m points of folding compute at no required cost is great. Hopefully more people see this thread -- took me all of an hour to get both set up, and that was with the hitch on GCP quota set up.
Re: Folding on Cloud instructions (3 mil ppd)
Foldbert, thanks very much for your feedback! Another user brought up the GPU all regions thing, and I have fixed by changing that instruction to "regions" instead of typing in "GPU," and updating more details about the quotas. With regards to initializing for step (3), I took another look and it still seems to be fine. I believe you inadvertantly hopped ahead to step (14) in VM Creation. That's where u must click on 'create.' I verified that compute engine gets initialized at step (3) and that's what's necessary before asking for a quota increase. Hopefully the new edits make this more clear.
-
- Posts: 10
- Joined: Wed Apr 15, 2020 4:45 am
Re: Folding on Cloud instructions (3 mil ppd)
Have had GCP stop folding overnight. When checking the logs, it is telling me:
"No CUDA or OpenCL 1.2+ support detected for GPU slot 00: gpu:0:4 TU104GL [Tesla T4] 81$"
Anyone else getting this issue?
"No CUDA or OpenCL 1.2+ support detected for GPU slot 00: gpu:0:4 TU104GL [Tesla T4] 81$"
Anyone else getting this issue?
Re: Folding on Cloud instructions (3 mil ppd)
it's an easy fix. u just have to redo 2 steps:
sudo apt-get install gcc make linux-headers-$(uname -r)
and then
sudo ./NVIDIA ... (whatever version you downloaded. it should still be sitting in the VM's directory)
then sudo reboot and you're back in business
why this happens I do not know... I don't think it happens more than once per the lifetime of your VM, which is good news, but when the VM is preempted, something gets fouled up with the gpu driver so it has to be reinstalled.
sudo apt-get install gcc make linux-headers-$(uname -r)
and then
sudo ./NVIDIA ... (whatever version you downloaded. it should still be sitting in the VM's directory)
then sudo reboot and you're back in business
why this happens I do not know... I don't think it happens more than once per the lifetime of your VM, which is good news, but when the VM is preempted, something gets fouled up with the gpu driver so it has to be reinstalled.
-
- Posts: 10
- Joined: Wed Apr 15, 2020 4:45 am
Re: Folding on Cloud instructions (3 mil ppd)
Awesome, thanks. Will give it a try now
-
- Posts: 5
- Joined: Sun Dec 06, 2020 9:28 pm
Re: Folding on Cloud instructions (3 mil ppd)
do you know why you need to use Sudo for each instruction? I am afraid that create some permission problems when someone without root permissions whats to make use of those drivers...
Re: Folding on Cloud instructions (3 mil ppd)
You use sudo to launch a command as an admin, which your normal user account is not.
When you do, the system asks for your password (and keeps track of that command).
Someone without a proper password can't use sudo.
When you do, the system asks for your password (and keeps track of that command).
Someone without a proper password can't use sudo.
-
- Posts: 5
- Joined: Sun Dec 06, 2020 9:28 pm
Re: Folding on Cloud instructions (3 mil ppd)
I know what is the purpose of Sudo, but my point is that if you use Sudo, all the execution is going under that mode, and my concern is that, if some files are generated from there (an installation normally does), then I am not sure if a normal user can make use of the installed software.... logically thinking I would say no
Re: Folding on Cloud instructions (3 mil ppd)
Sorry! I don't know, but if someone is keen to try and test that, I'd be interested in the result.
-
- Site Admin
- Posts: 7927
- Joined: Tue Apr 21, 2009 4:41 pm
- Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2 - Location: W. MA
Re: Folding on Cloud instructions (3 mil ppd)
From the commands shown, sudo is needed because they are writing or modifying system level files. A typical user account does not have that permission. Typical installs of system level files include execute status and sometimes read status to either all users or all users in specific groups.
iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
Re: Folding on Cloud instructions (3 mil ppd)
I spent 45 minutes this morning trying to figure out why GCP suddenly stopped working, and ended up in the same place of installing kernel source headers and getting the Tesla drivers re-installed. Guess I should have checked here first!
-
- Site Moderator
- Posts: 6986
- Joined: Wed Dec 23, 2009 9:33 am
- Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB
Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400 - Location: Land Of The Long White Cloud
- Contact:
Re: Folding on Cloud instructions (3 mil ppd)
It isn't Raspberry Pi 4, it is a type of instance that is available on GCP (Google Cloud Platform): https://cloud.google.com/compute/docs/gpus which would be the Tesla P4 GPU.MeeLee wrote:300k PPD for the Pi4?Knish wrote:~300k ppdIchbin3 wrote: I was looking for the PPD of the P4.
Last time I ran a 6-core I5, it ran well below 100k PPD.
What sorcery is this?
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time
Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time
Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
-
- Site Moderator
- Posts: 6349
- Joined: Sun Dec 02, 2007 10:38 am
- Location: Bordeaux, France
- Contact:
Re: Folding on Cloud instructions (3 mil ppd)
Does anyone know the typical PPD we could expect for a T4 GPU in GCP ? Also, did you notice consistent PPDs, or do they vary ?
Re: Folding on Cloud instructions (3 mil ppd)
it's been a pretty steady 800k to 1 mil ppd for several months, but checking now it's got a santa clause P13437 WU so it's projecting 1.4 mil
-
- Site Moderator
- Posts: 6349
- Joined: Sun Dec 02, 2007 10:38 am
- Location: Bordeaux, France
- Contact:
Re: Folding on Cloud instructions (3 mil ppd)
It is very disappointing for a GPU that has the same number of SP as the 2070 Super ...
By the way, I have never been able to create a spot instance on Azure, so I've given up.
By the way, I have never been able to create a spot instance on Azure, so I've given up.