I have been running F@H on my Windows PC for many weeks now, and it's been working perfectly fine.
I am using the Advanced Control and I see that I can add a new computer to monitor from here, so I got my Fedora machine set up with the FAHClient and that's up and running too!
I am running and folding successfully on the Fedora machine, and I have set up its local firewall and FAHClient's config to allow access to the web panel. On my Windows machine, I can connect to the web panel perfectly fine and I can see the Fedora machine folding. Great!
However, for some reason, the Advanced Control panel on my Windows machine cannot connect to the FAHClient running on the Fedora machine. I have the port set as default, 36330, and I have successfully tested the port opening with telnet. The Windows machine can telnet to the FAHClient running on the Fedora machine over port 36330 successfully.
Yet, the Advanced Control panel just refuses to establish a connection to the client.
Is there anything I've missed here? What could be going wrong?
[Fedora] Advanced Control cannot connect to remote client.
Moderators: Site Moderators, FAHC Science Team
-
- Posts: 5
- Joined: Fri Aug 14, 2020 6:07 am
-
- Posts: 1996
- Joined: Sun Mar 22, 2020 5:52 pm
- Hardware configuration: 1: 2x Xeon E5-2697v3@2.60GHz, 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon E3-1505Mv5@2.80GHz, 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: i7-960@3.20GHz, 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21 - Location: UK
Re: [Fedora] Advanced Control cannot connect to remote clien
Have you configured the remote linux advanced control (if using) to allow remote connections? ... If using Advanced control on it you will need to Configure the Connection tab to allow your windows machine network address to access (with/without password) ... Not sure how to set this up without Advance Control in Linux - guess it will be some form of config edit but one of the linux gurus will be able to advise.
2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070
(Green/Bold = Active)
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070
(Green/Bold = Active)
Re: [Fedora] Advanced Control cannot connect to remote clien
As a general rule, on all Windows machines, the network must be private (not public).
On the Linux (remote) machine, the config should look like this:
The remote FAH must be restarted after any change in its config.
On the Linux (remote) machine, the config should look like this:
Code: Select all
<config>
(...)
<!-- HTTP Server -->
<allow v="127.0.0.1 IP of the Windows machine, or IPs, or mask"/>
<!-- Network -->
<proxy v=":8080"/>
<!-- Remote Command Server -->
<command-allow-no-pass v="127.0.0.1 IP of the Windows machine, or IPs, or mask"/>
(...)
</config>
-
- Posts: 5
- Joined: Fri Aug 14, 2020 6:07 am
Re: [Fedora] Advanced Control cannot connect to remote clien
This is what I was missing, adding this worked. Thank you for your help!ajm wrote:Code: Select all
<command-allow-no-pass v="127.0.0.1 IP of the Windows machine, or IPs, or mask"/>