Cooling

A forum for discussing FAH-related hardware choices and info on actual products (not speculation).

Moderator: Site Moderators

Forum rules
Please read the forum rules before posting.
Post Reply
Ricorocks
Posts: 383
Joined: Thu Aug 04, 2016 1:49 pm
Location: Georgetown, Texas

Cooling

Post by Ricorocks »

Just arrived Dell T3500 Precision server. THANKS Foldy!!!!!!

Upcoming modification, 550 or 600W gold PSU, Two GTX 1070's

The machine has 0 case fans.

Rear can accommodate 2 smaller fans, front 1 smaller fan. It's final placement, never goes over 80F, mostly 75 - 78F.

I was thinking "positive psi" more CFM in than out. What spread or delta CFM's, btwn. IN & OUT is reasonable

Say 100 cfm in so out CFM/s should be 90, 80, 70...10? I'll be limited by say noise, so fans should be, less than 60 db

So maybe something like this in https://www.newegg.com/Product/Product. ... -_-Product

The rear exhaust has room for two fans, if two fans used, would that be cumulative 1 40cfm fan + 1 40cfm an = 80 cfm total exhaust. Seems logical. Also using two fans (meeting the spread btwn. in & out, seems better than one rear fan making 80cfm.

Or should I go a different approach to remove heat???

Thanks
ComputerGenie
Posts: 230
Joined: Mon Dec 12, 2016 4:06 am

Re: Cooling

Post by ComputerGenie »

If it's the case I think it is, my suggestion would involve some tin snips and some 120mm fans.
FAMAS
Posts: 86
Joined: Fri Sep 16, 2016 6:30 pm

Re: Cooling

Post by FAMAS »

Ricorocks wrote:Just arrived Dell T3500 Precision server. THANKS Foldy!!!!!!

Upcoming modification, 550 or 600W gold PSU, Two GTX 1070's

The machine has 0 case fans.

Rear can accommodate 2 smaller fans, front 1 smaller fan. It's final placement, never goes over 80F, mostly 75 - 78F.

I was thinking "positive psi" more CFM in than out. What spread or delta CFM's, btwn. IN & OUT is reasonable

Say 100 cfm in so out CFM/s should be 90, 80, 70...10? I'll be limited by say noise, so fans should be, less than 60 db

So maybe something like this in https://www.newegg.com/Product/Product. ... -_-Product

The rear exhaust has room for two fans, if two fans used, would that be cumulative 1 40cfm fan + 1 40cfm an = 80 cfm total exhaust. Seems logical. Also using two fans (meeting the spread btwn. in & out, seems better than one rear fan making 80cfm.

Or should I go a different approach to remove heat???

Thanks
i would suggest to not use fan, instead to use phase change coolers as in portable air conditioners.
Ricorocks
Posts: 383
Joined: Thu Aug 04, 2016 1:49 pm
Location: Georgetown, Texas

Re: Cooling

Post by Ricorocks »

I don't think OSA, or the computers intake air is at issue, as intake air is never above 80F. Removing the heat inside the case, is the question.

Positive psi More CFM's "IN" than "OUT" Whats the sweet spot, for CFMs

Negative psi More CFM's "OUT" than "IN" Would also have a sweet spot for the differential btwn in & out CFM's <Suddenly I have the craving for "In & Out burger">

"i would suggest to not use fan, instead to use phase change coolers as in portable air conditioners." This strategy relies on thermodynamics (heat always flows to cold), or natural cooling, fans assist. So cooling the intake air is rather expensive.

Also tin snips to allow for larger fans, is not an option, a new case, would be easier, but much more expensive than Fans.
jrweiss
Posts: 704
Joined: Tue Dec 04, 2007 6:56 am
Hardware configuration: Ryzen 7 5700G, 22.40.46 VGA driver; 32GB G-Skill Trident DDR4-3200; Samsung 860EVO 1TB Boot SSD; VelociRaptor 1TB; MSI GTX 1050ti, 551.23 studio driver; BeQuiet FM 550 PSU; Lian Li PC-9F; Win11Pro-64, F@H 8.3.5.

[Suspended] Ryzen 7 3700X, MSI X570MPG, 32GB G-Skill Trident Z DDR4-3600; Corsair MP600 M.2 PCIe Gen4 Boot, Samsung 840EVO-250 SSDs; VelociRaptor 1TB, Raptor 150; MSI GTX 1050ti, 526.98 driver; Kingwin Stryker 500 PSU; Lian Li PC-K7B. Win10Pro-64, F@H 8.3.5.
Location: @Home
Contact:

Re: Cooling

Post by jrweiss »

Positive pressure will significantly reduce the dust accumulation in the box, since all intake air will be via the [filtered] intake fan. With negative pressure, dust will be sucked in via ALL crevices...

Don't forget to include the PSU fan in your calculation, as well as any contribution by GPU exhaust through the backplane. You MAY find that you don't need additional exhaust fans, depending on the setup.

What is the total TDP of the CPU + GPUs? How much air do the GPUs exhaust through the backplane? Is the PSU isolated, or in the main case compartment? Is its fan thermally controlled, or constantly on?

It's hard to recommend a setup without knowing the exact layout of the system...

With a lower-power unit, a single, efficient (e.g., Noctua NF-S12A, 63 cfm @17.8 dB(A)) 120mm intake fan may be adequate (though I use dual 120s with PWM control). However, you will likely need more than that with the dual GPU setup. If you already have exhaust via the PSU and GPUs, you may have to use the rear fans as intake fans. Use slotted backplane covers to direct airflow as needed (e.g., near the GPU backplanes). Type and orientation of the CPU cooler are factors as well.
Ryzen 7 5700G, 22.40.46 VGA driver; MSI GTX 1050ti, 551.23 studio driver
Ryzen 7 3700X; MSI GTX 1050ti, 551.23 studio driver [Suspended]
foldy
Posts: 2040
Joined: Sat Dec 01, 2012 3:43 pm
Hardware configuration: Folding@Home Client 7.6.13 (1 GPU slots)
Windows 7 64bit
Intel Core i5 2500k@4Ghz
Nvidia gtx 1080ti driver 441

Re: Cooling

Post by foldy »

I found the air flow in my case was the best with equal count of blow in and blow out fans.
All fans in the lower half of the case blow in from front, bottom and side.
All fans in the upper half of the case blow out from side, back and top.

My power supply is independent from case air flow because it blows in from bottom and out again at back.

All my fans are silent so I needed more of them.
My GPUs run cooler with closed case than with open case so that's a good cooling.
Ricorocks
Posts: 383
Joined: Thu Aug 04, 2016 1:49 pm
Location: Georgetown, Texas

Re: Cooling

Post by Ricorocks »

Messrs jrweiss, foldy: Great posts Thank You!
Post Reply