Project: 6067 (Run 0, Clone 72, Gen 45)

Moderators: Site Moderators, FAHC Science Team

Post Reply
zodac
Posts: 55
Joined: Wed Mar 03, 2010 11:17 pm

Project: 6067 (Run 0, Clone 72, Gen 45)

Post by zodac »

I think this one might be a bad WU. The client has been reinstalled multiple times, yet the same WU keeps coming back. It constantly fails. It's happening to 2 people so far; same WU, same RCG values.

Code: Select all

*------------------------------*
[15:06:26] Folding@Home Gromacs SMP Core
[15:06:26] Version 2.22 (Mar 12, 2010)
[15:06:26] 
[15:06:26] Preparing to commence simulation
[15:06:26] - Looking at optimizations...
[15:06:26] - Created dyn
[15:06:26] - Files status OK
[15:06:26] - Expanded 1765741 -> 2251033 (decompressed 127.4 percent)
[15:06:26] Called DecompressByteArray: compressed_data_size=1765741 data_size=2251033, decompressed_data_size=2251033 diff=0
[15:06:26] - Digital signature verified
[15:06:26] 
[15:06:26] Project: 6067 (Run 0, Clone 72, Gen 45)
[15:06:26] 
[15:06:26] Assembly optimizations on if available.
[15:06:26] Entering M.D.
[15:06:32] Completed 0 out of 500000 steps  (0%)
[15:06:32] Gromacs cannot continue further.
[15:06:32] Going to send back what have done -- stepsTotalG=500000
[15:06:32] Work fraction=-1.#IND steps=500000.
[15:06:38] logfile size=0 infoLength=0 edr=0 trr=23
[15:06:38] logfile size: 0 info=0 bed=0 hdr=23
[15:06:38] - Writing 640 bytes of core data to disk...
[15:06:40] CoreStatus = C0000005 (-1073741819)
[15:06:40] Client-core communications error: ERROR 0xc0000005
[15:06:40] Deleting current work unit & continuing...
[15:06:52] - Preparing to get new work unit...
[15:06:52] Cleaning up work directory
[15:06:52] + Attempting to get work packet
[15:06:52] Passkey found
[15:06:52] - Connecting to assignment server
[15:06:53] - Successful: assigned to (171.64.65.54).
[15:06:53] + News From Folding@Home: Welcome to Folding@Home
[15:06:53] Loaded queue successfully.
[15:07:00] + Closed connections
[15:07:05] 
[15:07:05] + Processing work unit
[15:07:05] Core required: FahCore_a3.exe
[15:07:05] Core found.
[15:07:05] Working on queue slot 02 [August 25 15:07:05 UTC]
[15:07:05] + Working ...
[15:07:05] 
[15:07:05] *------------------------------*
[15:07:05] Folding@Home Gromacs SMP Core
[15:07:05] Version 2.22 (Mar 12, 2010)
[15:07:05] 
[15:07:05] Preparing to commence simulation
[15:07:05] - Looking at optimizations...
[15:07:05] - Created dyn
[15:07:05] - Files status OK
[15:07:06] - Expanded 1765741 -> 2251033 (decompressed 127.4 percent)
[15:07:06] Called DecompressByteArray: compressed_data_size=1765741 data_size=2251033, decompressed_data_size=2251033 diff=0
[15:07:06] - Digital signature verified
[15:07:06] 
[15:07:06] Project: 6067 (Run 0, Clone 72, Gen 45)
[15:07:06] 
[15:07:06] Assembly optimizations on if available.
[15:07:06] Entering M.D.
[15:07:12] Completed 0 out of 500000 steps  (0%)
[15:07:12] Gromacs cannot continue further.
[15:07:12] Going to send back what have done -- stepsTotalG=500000
[15:07:12] Work fraction=-1.#IND steps=500000.
[15:07:19] logfile size=0 infoLength=0 edr=0 trr=23
[15:07:19] logfile size: 0 info=0 bed=0 hdr=23
[15:07:19] - Writing 640 bytes of core data to disk...
[15:07:22] CoreStatus = C0000005 (-1073741819)
[15:07:22] Client-core communications error: ERROR 0xc0000005
[15:07:22] Deleting current work unit & continuing...

Folding@Home Client Shutdown at user request.

Folding@Home Client Shutdown.


--- Opening Log file [August 25 15:07:47 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: D:\~Downloads\~Apps\Folding\FAH6.30-win32-SMP
Executable: D:\~Downloads\~Apps\Folding\FAH6.30-win32-SMP\Folding@home-Win32-x86.exe
Arguments: -smp 4 

[15:07:47] - Ask before connecting: No
[15:07:47] - User name: Strat79 (Team 37726)
[15:07:47] - User ID: 52DE92AE7C828779
[15:07:47] - Machine ID: 1
[15:07:47] 
[15:07:47] Work directory not found. Creating...
[15:07:47] Could not open work queue, generating new queue...
[15:07:47] - Preparing to get new work unit...
[15:07:47] Cleaning up work directory
[15:07:47] + Attempting to get work packet
[15:07:47] Passkey found
[15:07:47] - Connecting to assignment server
[15:07:48] - Successful: assigned to (171.64.65.54).
[15:07:48] + News From Folding@Home: Welcome to Folding@Home
[15:07:48] Loaded queue successfully.
[15:07:56] + Closed connections
[15:07:56] 
[15:07:56] + Processing work unit
[15:07:56] Core required: FahCore_a3.exe
[15:07:56] Core found.
[15:07:56] Working on queue slot 01 [August 25 15:07:56 UTC]
[15:07:56] + Working ...
[15:07:56] 
[15:07:56] *------------------------------*
[15:07:56] Folding@Home Gromacs SMP Core
[15:07:56] Version 2.22 (Mar 12, 2010)
[15:07:56] 
[15:07:56] Preparing to commence simulation
[15:07:56] - Looking at optimizations...
[15:07:56] - Created dyn
[15:07:56] - Files status OK
[15:07:56] - Expanded 1765741 -> 2251033 (decompressed 127.4 percent)
[15:07:56] Called DecompressByteArray: compressed_data_size=1765741 data_size=2251033, decompressed_data_size=2251033 diff=0
[15:07:56] - Digital signature verified
[15:07:56] 
[15:07:56] Project: 6067 (Run 0, Clone 72, Gen 45)
[15:07:56] 
[15:07:56] Assembly optimizations on if available.
[15:07:56] Entering M.D.
[15:08:02] Completed 0 out of 500000 steps  (0%)
[15:08:02] Gromacs cannot continue further.
[15:08:02] Going to send back what have done -- stepsTotalG=500000
[15:08:02] Work fraction=-1.#IND steps=500000.

Folding@Home Client Shutdown at user request.

Folding@Home Client Shutdown.
Image
Top
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Project: 6067 (Run 0, Clone 72, Gen 45)

Post by bruce »

Thank you for the report.

The WU (P6067,R0,C72,G45) has been reported as a bad WU.
Top
zodac
Posts: 55
Joined: Wed Mar 03, 2010 11:17 pm

Re: Project: 6067 (Run 0, Clone 72, Gen 45)

Post by zodac »

So does the client need to be restarted, or will it download a new WU itself?
Image
Top
Strat79
Posts: 1
Joined: Tue Mar 16, 2010 1:44 am

Re: Project: 6067 (Run 0, Clone 72, Gen 45)

Post by Strat79 »

Thank you Bruce. Tis my log Zodac posted above, It was caught in an endless loop of downloading the same WU no matter what I done(remove work folder/queue.dat, even completely removed all client files and re-downloaded/setup again a few times). Had to take off -smp and get a unicore WU, hopefully the project has been removed by the time it is complete.
Top
Flathead74
Posts: 266
Joined: Sun Dec 02, 2007 6:08 pm
Location: Central New York
Contact:
Contact Flathead74

Re: Project: 6067 (Run 0, Clone 72, Gen 45)

Post by Flathead74 »

I also received this WU and also experienced failure with it.

Running Ubuntu, I had to delete the machinedependent.dat file in order to get a different WU.

Folding@Home Client Version 6.29

[18:13:54] Folding@Home Gromacs SMP Core
[18:13:54] Version 2.22 (June 10, 2010)
.....>
[18:13:55] Project: 6067 (Run 0, Clone 72, Gen 45)
[18:13:55]
[18:13:55] Assembly optimizations on if available.
[18:13:55] Entering M.D.
[18:14:01] Completed 0 out of 500000 steps (0%)
[18:14:02] CoreStatus = 8B (139)
[18:14:02] Client-core communications error: ERROR 0x8b
[18:14:02]
Folding@Home will go to sleep for 1 day as there have been 5 consecutive Cores executed which failed to complete a work unit.
Top
GeneralRavel
Posts: 20
Joined: Sun May 23, 2010 10:18 am
Location: Ohio

Re: Project: 6067 (Run 0, Clone 72, Gen 45)

Post by GeneralRavel »

Reconfiguring the client with a different machine ID can also persuade the assignment server to give out a different WU. Just make sure you don't conflict with any other clients you are running
Anyone remember Marty's Quake II Playhouse? :)
Image
Top
sortofageek
Site Admin
Posts: 3110
Joined: Fri Nov 30, 2007 8:06 pm
Location: Team Helix
Contact:
Contact sortofageek

Re: Project: 6067 (Run 0, Clone 72, Gen 45)

Post by sortofageek »

The WU (P6067,R0,C72,G45) has been reported as a bad WU.

I just reported it again, but there has been no data back on that one since 2010-08-26 08:09:28 PDT.
Top
Flathead74
Posts: 266
Joined: Sun Dec 02, 2007 6:08 pm
Location: Central New York
Contact:
Contact Flathead74

Re: Project: 6067 (Run 0, Clone 72, Gen 45)

Post by Flathead74 »

GeneralRavel wrote:Reconfiguring the client with a different machine ID can also persuade the assignment server to give out a different WU. Just make sure you don't conflict with any other clients you are running
Oddly enough, while this is usually the case, simply assigning a different machine ID did not work this time.
Top
Post Reply

Return to “Issues with a specific WU”