Unknown shutdown error

Moderators: Site Moderators, FAHC Science Team

Post Reply
barebear
Posts: 127
Joined: Fri Dec 28, 2007 7:11 pm
Hardware configuration: GIGABYTE GA-P55A-UD3 LGA 1156 Intel P55 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Intel Core i7-860 Lynnfield 2.8GHz 8MB L3 Cache LGA 1156 95W Quad-Core Processor BX80605I7860
16 Gb ram
PNY VCGGTS2501XPB GeForce GTS 250 1GB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
Kingston SSDNow V Series SNV425-S2/64GB 2.5" 64GB SATA II Internal Solid State Drive (SSD)

Unknown shutdown error

Post by barebear »

In the past when FAH would go to sleep per the end of the following FAH 504 console.exe text, I was advised to open the FAH folder and delete the "Work" folder and "queue.dat", and then reopen FAH 504 console.exe. Till now that has solved the problem. Last night, after deleting the afore-mentioned Work and queue.dat, and reopening the FAH 504 console.exe, the following was in the console box:

[17:22:45] - Looking at optimizations...
[17:22:45] - Working with standard loops on this execution.
[17:22:45] - Files status OK
[17:22:46] - Expanded 365946 -> 1800796 (decompressed 492.0 percent)
[17:22:46] - Checksums don't match (work/wudata_03.xtc)
[17:22:46] - Starting from initial work packet
[17:22:46]
[17:22:46] Project: 3731 (Run 89, Clone 16, Gen 6)
[17:22:46]
[17:22:46] Entering M.D.
[17:23:02] Gromacs error.
[17:23:02]
[17:23:02] Folding@home Core Shutdown: UNKNOWN_ERROR
[17:23:06] CoreStatus = 79 (121)
[17:23:06] Client-core communications error: ERROR 0x79
[17:23:06] Deleting current work unit & continuing...
[17:23:26] - Preparing to get new work unit...
[17:23:26] + Attempting to get work packet
[17:23:26] - Connecting to assignment server
[17:23:27] - Successful: assigned to (171.64.122.82).
[17:23:27] + News From Folding@Home: Welcome to Folding@Home
[17:23:27] Loaded queue successfully.
[17:23:29] + Closed connections
[17:23:34]
[17:23:34] + Processing work unit
[17:23:34] Core required: FahCore_81.exe
[17:23:34] Core found.
[17:23:34] Working on Unit 04 [March 10 17:23:34]
[17:23:34] + Working ...
[17:23:34]
[17:23:34] *------------------------------*
[17:23:34] Folding@Home Gromacs Simulated Tempering Core
[17:23:34] Version 1.10 (Oct 4, 2007)
[17:23:34]
[17:23:34] Preparing to commence simulation
[17:23:34] - Ensuring status. Please wait.
[17:23:51] - Looking at optimizations...
[17:23:51] - Working with standard loops on this execution.
[17:23:51] - Files status OK
[17:23:51] - Expanded 365946 -> 1800796 (decompressed 492.0 percent)
[17:23:51] - Checksums don't match (work/wudata_04.xtc)
[17:23:52] - Starting from initial work packet
[17:23:52]
[17:23:52] Project: 3731 (Run 89, Clone 16, Gen 6)
[17:23:52]
[17:23:52] Entering M.D.
[17:24:08] Gromacs error.
[17:24:08]
[17:24:08] Folding@home Core Shutdown: UNKNOWN_ERROR
[17:24:12] CoreStatus = 79 (121)
[17:24:12] Client-core communications error: ERROR 0x79
[17:24:12] Deleting current work unit & continuing...
[17:24:32] - Preparing to get new work unit...
[17:24:32] + Attempting to get work packet
[17:24:32] - Connecting to assignment server
[17:24:32] - Successful: assigned to (171.64.122.82).
[17:24:32] + News From Folding@Home: Welcome to Folding@Home
[17:24:32] Loaded queue successfully.
[17:24:34] + Closed connections
[17:24:39]
[17:24:39] + Processing work unit
[17:24:39] Core required: FahCore_81.exe
[17:24:39] Core found.
[17:24:39] Working on Unit 05 [March 10 17:24:39]
[17:24:39] + Working ...
[17:24:39]
[17:24:39] *------------------------------*
[17:24:39] Folding@Home Gromacs Simulated Tempering Core
[17:24:39] Version 1.10 (Oct 4, 2007)
[17:24:39]
[17:24:39] Preparing to commence simulation
[17:24:39] - Ensuring status. Please wait.
[17:24:56] - Looking at optimizations...
[17:24:56] - Working with standard loops on this execution.
[17:24:56] - Files status OK
[17:24:57] - Expanded 365946 -> 1800796 (decompressed 492.0 percent)
[17:24:57] - Checksums don't match (work/wudata_05.xtc)
[17:24:57] - Starting from initial work packet
[17:24:57]
[17:24:57] Project: 3731 (Run 89, Clone 16, Gen 6)
[17:24:57]
[17:24:57] Entering M.D.
[17:25:13] Gromacs error.
[17:25:13]
[17:25:13] Folding@home Core Shutdown: UNKNOWN_ERROR
[17:25:18] CoreStatus = 79 (121)
[17:25:18] Client-core communications error: ERROR 0x79
[17:25:18] - Attempting to download new core...
[17:25:18] + Downloading new core: FahCore_81.exe
[17:25:18] + 10240 bytes downloaded
[17:25:18] + 20480 bytes downloaded

snipped

[17:25:20] + 825684 bytes downloaded
[17:25:20] Verifying core Core_81.fah...
[17:25:21] Signature is VALID
[17:25:21]
[17:25:21] Trying to unzip core FahCore_81.exe
[17:25:21] Decompressed FahCore_81.exe (2396160 bytes) successfully
[17:25:22] + Core successfully engaged
[17:25:22] Deleting current work unit & continuing...
[17:25:42] - Preparing to get new work unit...
[17:25:42] + Attempting to get work packet
[17:25:42] - Connecting to assignment server
[17:25:42] - Successful: assigned to (171.64.122.82).
[17:25:42] + News From Folding@Home: Welcome to Folding@Home
[17:25:42] Loaded queue successfully.
[17:25:44] + Closed connections
[17:25:49]
[17:25:49] + Processing work unit
[17:25:49] Core required: FahCore_81.exe
[17:25:49] Core found.
[17:25:49] Working on Unit 06 [March 10 17:25:49]
[17:25:49] + Working ...
[17:25:49]
[17:25:49] *------------------------------*
[17:25:49] Folding@Home Gromacs Simulated Tempering Core
[17:25:49] Version 1.10 (Oct 4, 2007)
[17:25:49]
[17:25:49] Preparing to commence simulation
[17:25:49] - Ensuring status. Please wait.
[17:26:06] - Looking at optimizations...
[17:26:06] - Working with standard loops on this execution.
[17:26:06] - Files status OK
[17:26:07] - Expanded 365946 -> 1800796 (decompressed 492.0 percent)
[17:26:07] - Checksums don't match (work/wudata_06.xtc)
[17:26:07] - Starting from initial work packet
[17:26:07]
[17:26:07] Project: 3731 (Run 89, Clone 16, Gen 6)
[17:26:07]
[17:26:07] Entering M.D.
[17:26:23] Gromacs error.
[17:26:23]
[17:26:23] Folding@home Core Shutdown: UNKNOWN_ERROR
[17:26:27] CoreStatus = 79 (121)
[17:26:27] Client-core communications error: ERROR 0x79
[17:26:27] Deleting current work unit & continuing...
[17:26:48] - Preparing to get new work unit...
[17:26:48] + Attempting to get work packet
[17:26:48] - Connecting to assignment server
[17:26:48] - Successful: assigned to (171.64.122.82).
[17:26:48] + News From Folding@Home: Welcome to Folding@Home
[17:26:48] Loaded queue successfully.
[17:26:48] - Error: Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[17:26:57] + Attempting to get work packet
[17:26:57] - Connecting to assignment server
[17:26:57] - Successful: assigned to (171.64.122.82).
[17:26:57] + News From Folding@Home: Welcome to Folding@Home
[17:26:57] Loaded queue successfully.
[17:26:59] + Closed connections
[17:27:04]
[17:27:04] + Processing work unit
[17:27:04] Core required: FahCore_81.exe
[17:27:04] Core found.
[17:27:04] Working on Unit 07 [March 10 17:27:04]
[17:27:04] + Working ...
[17:27:04]
[17:27:04] *------------------------------*
[17:27:04] Folding@Home Gromacs Simulated Tempering Core
[17:27:04] Version 1.10 (Oct 4, 2007)
[17:27:04]
[17:27:04] Preparing to commence simulation
[17:27:04] - Ensuring status. Please wait.
[17:27:21] - Looking at optimizations...
[17:27:21] - Working with standard loops on this execution.
[17:27:21] - Files status OK
[17:27:22] - Expanded 365155 -> 1800420 (decompressed 493.0 percent)
[17:27:22] - Checksums don't match (work/wudata_07.xtc)
[17:27:22] - Starting from initial work packet
[17:27:22]
[17:27:22] Project: 3639 (Run 43, Clone 1, Gen 7)
[17:27:22]
[17:27:22] Entering M.D.
[17:27:38] Gromacs error.
[17:27:38]
[17:27:38] Folding@home Core Shutdown: UNKNOWN_ERROR
[17:27:43] CoreStatus = 79 (121)
[17:27:43] Client-core communications error: ERROR 0x79
[17:27:43] Deleting current work unit & continuing...
[17:28:03] - Preparing to get new work unit...
[17:28:03] + Attempting to get work packet
[17:28:03] - Connecting to assignment server
[17:28:03] - Successful: assigned to (171.64.122.82).
[17:28:03] + News From Folding@Home: Welcome to Folding@Home
[17:28:03] Loaded queue successfully.
[17:28:05] + Closed connections
[17:28:10]
[17:28:10] + Processing work unit
[17:28:10] Core required: FahCore_81.exe
[17:28:10] Core found.
[17:28:10] Working on Unit 08 [March 10 17:28:10]
[17:28:10] + Working ...
[17:28:10]
[17:28:10] *------------------------------*
[17:28:10] Folding@Home Gromacs Simulated Tempering Core
[17:28:10] Version 1.10 (Oct 4, 2007)
[17:28:10]
[17:28:10] Preparing to commence simulation
[17:28:10] - Ensuring status. Please wait.
[17:28:27] - Looking at optimizations...
[17:28:27] - Working with standard loops on this execution.
[17:28:27] - Files status OK
[17:28:28] - Expanded 365155 -> 1800420 (decompressed 493.0 percent)
[17:28:28] - Checksums don't match (work/wudata_08.xtc)
[17:28:28] - Starting from initial work packet
[17:28:28]
[17:28:28] Project: 3639 (Run 43, Clone 1, Gen 7)
[17:28:28]
[17:28:28] Entering M.D.
[17:28:44] Gromacs error.
[17:28:44]
[17:28:44] Folding@home Core Shutdown: UNKNOWN_ERROR
[17:28:48] CoreStatus = 79 (121)
[17:28:48] Client-core communications error: ERROR 0x79
[17:28:48]
Folding@Home will go to sleep for 1 day as there have been 5 consecutive Cores e
xecuted which failed to complete a work unit.
[17:28:48] (To wake it up early, quit the application and restart it.)
[17:28:48] If problems persist, please visit our website at http://folding.stanf
ord.edu for help.
[17:28:48] + Sleeping...

Here is a picture of the current folder contents when the above data was generated:

Image


Please advise what/how to do to resolve the problem
GIGABYTE GA-P55A-UD3 LGA 1156 Intel P55 SATA 6Gb/s USB 3.0 ATX Intel MB
Intel Core i7-860 Lynnfield 2.8GHz 8MB L3 Cache LGA 1156 95W Quad-Core Proc.BX80605I7860
16Gb ram
Top
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:
Contact 7im

Re: Unknown shutdown error

Post by 7im »

I don't know that deleting those files are always the best recommendation. They may be a work around, but fixing the original problem would be a better course of action so you don't have to delete files.

First, go a head and delete the unitinfo.txt as well. Delete the work folder and queue.dat file again, if new ones have been created. Then delete the client.cfg file. Run the client again, and answer the setup questions again.

Does it work better now? If not, please post the first 30 lines of fahlog.txt file after the client restarts, including ALL of the startup info. Thanks.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Top
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Unknown shutdown error

Post by bruce »

Error 0x79 is unknown, but one thing that is known about it is that it's an error from Windows, not from FAH.

In some cases, specific WUs seem to have a higher probability of errors.

One other possibility that has been mentioned in the past is actual hardware errors, including things like memory errors. If your system is overheating or some of the components have started having occasional errors (or if you're overclocked) you might look into that area more carefully. Deleting files in FAH discards whatever work you've done and may or may not lead to a new assignment, but it's a pretty poor way to cure a hardware problem, if that happens to be what's causing your problems.
Top
barebear
Posts: 127
Joined: Fri Dec 28, 2007 7:11 pm
Hardware configuration: GIGABYTE GA-P55A-UD3 LGA 1156 Intel P55 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Intel Core i7-860 Lynnfield 2.8GHz 8MB L3 Cache LGA 1156 95W Quad-Core Processor BX80605I7860
16 Gb ram
PNY VCGGTS2501XPB GeForce GTS 250 1GB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
Kingston SSDNow V Series SNV425-S2/64GB 2.5" 64GB SATA II Internal Solid State Drive (SSD)

Re: Unknown shutdown error

Post by barebear »

Hi Bruce,

I don't overclock or do any tweaking to increase processor performance, and my HD is at 78 degrees Fahrenheit---I don't have a monitor for my processor or MB, but have never had any performance/operating issues with them or any memory issues--Windows runs perfectly except for this FAH thing---system is a Dell 8100 w/ Pent 4 1500 MHz and 1 GB RAM.

Hi 7im,

Followed your instructions, but after deleting the 3 items you mentioned there were no setup questions when I ran the client. I deleted everything from the program folder, downloaded FAH 504, and for now things seem to be working as they should. Here is current log file:

--- Opening Log file [March 10 21:46:52]


# Windows Console Edition #####################################################
###############################################################################

Folding@Home Client Version 5.04beta

http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: D:\My Documents\Folding@Home
Executable: D:\My Documents\Folding@Home\FAH504-Console.exe


[21:46:52] - Ask before connecting: No
[21:46:52] - User name: Peter_Baerwald (Team 39340)
[21:46:52] - User ID: 4C2F553605EC7C84
[21:46:52] - Machine ID: 1
[21:46:52]
[21:46:52] Loaded queue successfully.
[21:46:52] + Benchmarking ...
[21:46:55]
[21:46:55] + Processing work unit
[21:46:55] Core required: FahCore_82.exe
[21:46:55] Core found.
[21:46:55] Working on Unit 01 [March 10 21:46:55]
[21:46:55] + Working ...
[21:46:56]
[21:46:56] *------------------------------*
[21:46:56] Folding@Home PMD Core
[21:46:56] Version 1.03 (September 7, 2005)
[21:46:56]
[21:46:56] Preparing to commence simulation
[21:46:56] - Ensuring status. Please wait.
[21:47:13] - Looking at optimizations...
[21:47:13] - Working with standard loops on this execution.
[21:47:13] - Files status OK
[21:47:13] - Expanded 18647 -> 116680 (decompressed 625.7 percent)
[21:47:13]
[21:47:13] Project: 892 (Run 0, Clone 949, Gen 16)
[21:47:13]
[21:47:13] Entering M.D.
[21:47:19] Protein: p892_p53wtpeptide_gb
[21:47:19]
[21:47:19] Completed 0 out of 5000000 steps (0)
GIGABYTE GA-P55A-UD3 LGA 1156 Intel P55 SATA 6Gb/s USB 3.0 ATX Intel MB
Intel Core i7-860 Lynnfield 2.8GHz 8MB L3 Cache LGA 1156 95W Quad-Core Proc.BX80605I7860
16Gb ram
Top
anko1
Posts: 438
Joined: Mon Dec 03, 2007 1:31 am
Hardware configuration: Old Faithful CPU: Windows Graphical 5.03; Intel Pentium 4 Processor 540
(3.2GHz) HT;Windows XP
Big Red: Windows SMP Console 6.29; Windows GPU console 6.20r1; Intel Q9450 2.66G; ASUS P5Q 775 P45; [BFG 9800GTX+ old graphics card] NVidia GeForce 8800 GTX [as of 5/9/09]; Windows XP Pro SP3
Lenovo Think Pad: Windows 6.29 w/ SMP; Windows GPU Console 6.20r1 systray; Intel QX9300; NVIDIA Quadro FX-3700M; Windows XP Professional
Location: SF Peninsula

Re: Unknown shutdown error

Post by anko1 »

Not to be a trouble maker ;-), but I noticed the program is running standard loops. Why isn't there one of the optimizations like SSE?
Top
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:
Contact 7im

Re: Unknown shutdown error

Post by 7im »

Amber WUs are like Tinkers, they do not use SSE optimizations.

http://fahwiki.net/index.php/Cores#AMBER_core
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Top
anko1
Posts: 438
Joined: Mon Dec 03, 2007 1:31 am
Hardware configuration: Old Faithful CPU: Windows Graphical 5.03; Intel Pentium 4 Processor 540
(3.2GHz) HT;Windows XP
Big Red: Windows SMP Console 6.29; Windows GPU console 6.20r1; Intel Q9450 2.66G; ASUS P5Q 775 P45; [BFG 9800GTX+ old graphics card] NVidia GeForce 8800 GTX [as of 5/9/09]; Windows XP Pro SP3
Lenovo Think Pad: Windows 6.29 w/ SMP; Windows GPU Console 6.20r1 systray; Intel QX9300; NVIDIA Quadro FX-3700M; Windows XP Professional
Location: SF Peninsula

Re: Unknown shutdown error

Post by anko1 »

Thanks! Trying to learn something new everyday. :-)
Top
Post Reply

Return to “Discussions of General-FAH topics”