Folding Forum

With 2 of the same RX 580 graphics, and only folding slot 2 (FS02) is throwing different errors. "Is your system overclocked?" "Particle coordinate is nan" - My guess is either: overclock instability going too fast at too low of voltage, or overheating, or dying or defective gra...

You've posted some of the applicable lines of FAH's log, but when discussing GPU configuration issues, the essential information is about a page from the very beginning of FAH's log where it says *****SYSTEM****** CPU: ..... CPU ID: ..... CPUs: 4 Memory: ....GiB ... ... up to ... ... OS Arch: AMD64...

've seen a similar problem with my Nvidia GPU's. Your log shows 2 gpus with OpenCL. GPU 0 needs to be set to OpenCL 1 GPU 1 needs to be set to OpenCL 0 You will need to reconfigure the slots to these values to fix this. It's a glitch in the automatic slot configuration. I get the same errors when I...

If it helps for comparison sake in troubleshooting i got a WU that seems to be working fine now. you can use project 11777 as a reference if needed as it seems to be having no issues. Also FYI i turned the clock setting on my GPU to the chipset default of 1469 MHz instead of the factory OC default ...

sortShortList errors should probably be reported to the original thread just to keep them in the same place. Is there a way I can run a test work unit on the gpu I am having an issue with? Right now I have to wait (sometimes) hours before I get a work unit then have a window of a few minutes if I am...

1002 67df - 148c 2377 is the device id of the card I have installed at the moment. With only one card I am still getting a few sortShortList errors but the other ones are gone. After this WU is finished im going to try the other card by its self. EDIT: After switching out he gpus the errors are back...

00:39:09:WU02:FS02:0x22:Folding@home Core Shutdown: BAD_WORK_UNIT 00:39:10:WARNING:WU02:FS02:FahCore returned: BAD_WORK_UNIT (114 = 0x72) 00:39:10:WU02:FS02:Sending unit results: id:02 state:SEND error:FAULTY project:11761 run:0 clone:9143 gen:15 core:0x22 unit:0x0000001d80fccb0a5e7021860f9e8dca Th...

Joe_H wrote:Going through the beginning of the log in your first post, those WUs were failing with the sortShortList error. If you are seeing a different error in later WUs, could you post extracts from the log here that includes just those errors.

Sure. I'll do what I can to get this figured out.

Im seeing the same errors again. I havent made it through the entire thread about the sortShortList issue yet but so far I dont think this is related. The projects that are failing have 62180 atoms and only on slot 2. The other card has work on project 11749 (also 62180 atoms) and is working fine. I...

There was a problem found with some projects of a certain size and AMD cards that results in this issue. They are working on determining if the problem is in the driver or the folding core code. Temporarily they have disabled assignment of these projects to most AMD cards, the RDNA based ones such ...

I have 2 rx580s with the latest drivers. Whenever I get gpu work units they always go to folding slot 2. The other card has never seen any work as far as i can tell so I cant say for sure if this is specific to only 1 card. After a few minutes of work folding stops. Checking the log shows core shutd...

Using hardware monitor no temperature reaches 70 degrees before it stops folding. I might need to start a new post as I think my issue is different.

I have the same issue. I get a few gpu WU every day, but after a few minutes it stops. The logs show a bad WU error. Next time that happens i will post the log.